We lose so many of this damn things it drives me crazy so I decided to make a rainbow set and use different clips. My last lot kept pinging off due to way they were designed so you may have a soother clip but no actual clip attached!
You’ll need clips mine are 25mm wide, lengths of ribbon the same width, lighter, ruler and some snaps. (1) Mine were around 35cm long.
Start off by sealing one end of your ribbon with the lighter and placing through the clip so it goes towards the back (2). Once through fold over the raw edge and pin in place just above the clip so that edge is hidden (4). Now measure from the folded edge to 22cm along then add enough extra so it will go through a dummy and clip in place. I like to fold the edge under so may need an extra 1-2 cm for this aswell. You will be folding at the 22cm mark and pin in place where you want your snaps to meet.
Using a triple stitch – number 17 (6) stitch down the clip end of the ribbon. (5) If you don’t wish to sew you can attach a snap here to join this section with smooth side facing up.
On other end go through all 3 layers or 2 if you’re not folding it under with an awl. This is where your snaps will go. (7) Place your snap through so the working side is on same side as fold and neater smoother side is facing out. (8) Place the opposite side into other hole again so the working side is facing same way as other one or they wont meet.
You’re done! Why 22cm though? well this is the maximum legal length a soother clip can be before its deemed a strangulation risk. Of course it is your choice but please only use when supervised and be aware of the dangers. These are also not designed to be used when sleeping
Clips were bought here. Various ribbons were bought on eBay just search for grosgrain ribbon.